1 in. Mini 6 Outlet Indexing Valve with 5 and 6 Zone Cams

Description

• Requires a 3/4 – 1 HP pump with a 5/8 – 1 in. city water meter size and a 10 to 24 GPM flow rate (pump not included)
• Valve is recommended for use in an irrigation system driven by city water
• Can run from 2 to 6 zones based on the chosen cam configuration (3 and 4 zone installations require a special ‘white’ cam)
• 10 PSI min pressure rating, 1 in. inlet/outlet, and requires 10-25 GPM flow rate
• Manual and automatic operation
• An anti-siphon valve (not included) is recommended and may be required for safe operation of the FIMCO hydro indexing valve on a city water installation
• Only use clear PVC cement (not included) and allow the valve 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in construction of the indexing valve, purple primer is similar and must be used only on the PVC pipes and not the valve housing
• Please remember that pipe size is measured by inside diameter. This valve is made to accept 1″ pipe on the inlet and outlets. The outlets and inlet will be larger than the pipe size it receives. Actual inlet and out size is 1.32″ If you need help identifying which size indexing valve you require please visit this page: https://www.fimcomfg.com/identify-indexing-valve/
• FIMCO 1 in. 6 zone valve comes with the 6 zone cam installed and an included 5 zone cam.
• Can run 5 to 6 active zones depending on selected cam (additional cam included)
• Great alternative to individual solenoid valves
• 1 valve can replace (6) 1 in. solenoid valves
• 1 above ground FIMCO valve controls all zones eliminating the need to dig into the ground to locate electric solenoid valve boxes